Live migration TECH PREVIEW

Steps for a live migration using YugabyteDB Voyager

The following instructions describe the steps to perform and verify a successful live migration to YugabyteDB, including changes that continuously occur on the source.

Live migration workflow

The following workflows illustrate how you can perform data migration including changes happening on the source simultaneously. With the export data command, you can first export a snapshot and then start continuously capturing changes occurring on the source to an event queue on the disk. Using the import data command, you similarly import the snapshot first, and then continuously apply the exported change events on the target.

Eventually, the migration process reaches a steady state where you can cutover to the target database. You can stop your applications from pointing to your source database, let all the remaining changes be applied on the target YugabyteDB database, and then restart your applications pointing to YugabyteDB.

The following illustration describes how the data export and import operations are simultaneously handled by YugabyteDB Voyager.

Live migration short

The following illustration shows the steps in a live migration using YugabyteDB Voyager.

Live migration workflow

Phase Step Description
PREPARE Install voyager yb-voyager supports RHEL, CentOS, Ubuntu, and macOS, as well as airgapped and Docker-based installations.
Prepare source DB Create a new database user with READ access to all the resources to be migrated.
Prepare target DB Deploy a YugabyteDB database and create a user with necessary privileges.
SCHEMA Export Convert the database schema to PostgreSQL format using the yb-voyager export schema command.
Analyze Generate a Schema Analysis Report using the yb-voyager analyze-schema command. The report suggests changes to the PostgreSQL schema to make it appropriate for YugabyteDB.
Modify Using the report recommendations, manually change the exported schema.
Import Import the modified schema to the target YugabyteDB database using the yb-voyager import schema command.
LIVE MIGRATION Start Start the phases: export data first, followed by import data and archive changes simultaneously.
Export data The export data command first exports a snapshot and then starts continuously capturing changes from the source.
Import data The import data command first imports the snapshot, and then continuously applies the exported change events on the target.
Archive changes Continuously archive migration changes to limit disk utilization.
CUTOVER Initiate cutover Perform a cutover (stop streaming changes) when the migration process reaches a steady state where you can stop your applications from pointing to your source database, allow all the remaining changes to be applied on the target YugabyteDB database, and then restart your applications pointing to YugabyteDB.
Wait for cutover to complete Monitor the wait status using the cutover status command.
Verify target DB Check if the live migration is successful.
END End migration Clean up the migration information stored in export directory and databases (source and target).

Before proceeding with migration, ensure that you have completed the following steps:

Prepare the source database

Create a new database user, and assign the necessary user permissions.

  1. Ensure that your database log_mode is archivelog as follows:

    SELECT LOG_MODE FROM V$DATABASE;

    LOG_MODE
------------
ARCHIVELOG

    If log_mode is NOARCHIVELOG (that is, not enabled), run the following command:

    sqlplus /nolog
SQL>alter system set db_recovery_file_dest_size = 10G;
SQL>alter system set db_recovery_file_dest = '<oracle_path>/oradata/recovery_area' scope=spfile;
SQL> connect / as sysdba
SQL> Shutdown immediate
SQL> Startup mount
SQL> Alter database archivelog;
SQL> Alter database open;

  2. Create the tablespaces as follows:

    1. Connect to Pluggable database (PDB) as sysdba and run the following command:

      CREATE TABLESPACE logminer_tbs DATAFILE '/opt/oracle/oradata/ORCLCDB/ORCLPDB1/logminer_tbs.dbf'
  SIZE 25M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;

    2. Connect to Container database (CDB) as sysdba and run the following command:

      CREATE TABLESPACE logminer_tbs DATAFILE '/opt/oracle/oradata/ORCLCDB/logminer_tbs.dbf'
  SIZE 25M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;

  3. Run the following commands from CDB as sysdba:

    CREATE USER c##ybvoyager IDENTIFIED BY password
  DEFAULT TABLESPACE logminer_tbs
  QUOTA UNLIMITED ON logminer_tbs
  CONTAINER=ALL;

GRANT CREATE SESSION TO c##ybvoyager CONTAINER=ALL;
GRANT SET CONTAINER TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$DATABASE to c##ybvoyager CONTAINER=ALL;
GRANT FLASHBACK ANY TABLE TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ANY TABLE TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT_CATALOG_ROLE TO c##ybvoyager CONTAINER=ALL;
GRANT EXECUTE_CATALOG_ROLE TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ANY TRANSACTION TO c##ybvoyager CONTAINER=ALL;
GRANT LOGMINING TO c##ybvoyager CONTAINER=ALL;

GRANT CREATE TABLE TO c##ybvoyager CONTAINER=ALL;
GRANT LOCK ANY TABLE TO c##ybvoyager CONTAINER=ALL;
GRANT CREATE SEQUENCE TO c##ybvoyager CONTAINER=ALL;

GRANT EXECUTE ON DBMS_LOGMNR TO c##ybvoyager CONTAINER=ALL;
GRANT EXECUTE ON DBMS_LOGMNR_D TO c##ybvoyager CONTAINER=ALL;

GRANT SELECT ON V_$LOG TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$LOG_HISTORY TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$LOGMNR_LOGS TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$LOGMNR_CONTENTS TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$LOGMNR_PARAMETERS TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$LOGFILE TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$ARCHIVED_LOG TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$ARCHIVE_DEST_STATUS TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$TRANSACTION TO c##ybvoyager CONTAINER=ALL;

GRANT SELECT ON V_$MYSTAT TO c##ybvoyager CONTAINER=ALL;
GRANT SELECT ON V_$STATNAME TO c##ybvoyager CONTAINER=ALL;

  4. Enable supplemental logging in the database as follows:

    ALTER DATABASE ADD SUPPLEMENTAL LOG DATA;
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA (ALL) COLUMNS;

  1. Ensure that your database log_mode is archivelog as follows:

    SELECT LOG_MODE FROM V$DATABASE;

    LOG_MODE
------------
ARCHIVELOG

    If log_mode is NOARCHIVELOG (that is, not enabled), run the following command:

    exec rdsadmin.rdsadmin_util.set_configuration('archivelog retention hours',24);

  2. Connect to your database as an admin user, and create the tablespaces as follows:

    CREATE TABLESPACE logminer_tbs DATAFILE SIZE 25M AUTOEXTEND ON MAXSIZE UNLIMITED;

  3. Run the following commands connected to the admin or privileged user:

    CREATE USER ybvoyager IDENTIFIED BY password
  DEFAULT TABLESPACE logminer_tbs
  QUOTA UNLIMITED ON logminer_tbs;

GRANT CREATE SESSION TO YBVOYAGER;
begin rdsadmin.rdsadmin_util.grant_sys_object(
      p_obj_name  => 'V_$DATABASE',
      p_grantee   => 'YBVOYAGER',
      p_privilege => 'SELECT');
end;
/

GRANT FLASHBACK ANY TABLE TO YBVOYAGER;
GRANT SELECT ANY TABLE TO YBVOYAGER;
GRANT SELECT_CATALOG_ROLE TO YBVOYAGER;
GRANT EXECUTE_CATALOG_ROLE TO YBVOYAGER;
GRANT SELECT ANY TRANSACTION TO YBVOYAGER;
GRANT LOGMINING TO YBVOYAGER;

GRANT CREATE TABLE TO YBVOYAGER;
GRANT LOCK ANY TABLE TO YBVOYAGER;
GRANT CREATE SEQUENCE TO YBVOYAGER;


begin rdsadmin.rdsadmin_util.grant_sys_object(
      p_obj_name => 'DBMS_LOGMNR',
      p_grantee => 'YBVOYAGER',
      p_privilege => 'EXECUTE',
      p_grant_option => true);
end;
/

begin rdsadmin.rdsadmin_util.grant_sys_object(
      p_obj_name => 'DBMS_LOGMNR_D',
      p_grantee => 'YBVOYAGER',
      p_privilege => 'EXECUTE',
      p_grant_option => true);
end;
/

begin rdsadmin.rdsadmin_util.grant_sys_object(
      p_obj_name  => 'V_$LOG',
      p_grantee   => 'YBVOYAGER',
      p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$LOG_HISTORY',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$LOGMNR_LOGS',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$LOGMNR_CONTENTS',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$LOGMNR_PARAMETERS',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$LOGFILE',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$ARCHIVED_LOG',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$ARCHIVE_DEST_STATUS',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$TRANSACTION',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$MYSTAT',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

begin
    rdsadmin.rdsadmin_util.grant_sys_object(
        p_obj_name  => 'V_$STATNAME',
        p_grantee   => 'YBVOYAGER',
        p_privilege => 'SELECT');
end;
/

  4. Enable supplemental logging in the database as follows:

    exec rdsadmin.rdsadmin_util.alter_supplemental_logging('ADD');

begin
    rdsadmin.rdsadmin_util.alter_supplemental_logging(
        p_action => 'ADD',
        p_type   => 'ALL');
end;
/

If you want yb-voyager to connect to the source database over SSL, refer to SSL Connectivity.

Connecting to Oracle instances

You can use only one of the following arguments to connect to your Oracle instance.

  • --source-db-schema (Schema name of the source database.)
  • --oracle-db-sid (Oracle System Identifier you can use while exporting data from Oracle instances.)
  • --oracle-tns-alias (TNS (Transparent Network Substrate) alias configured to establish a secure connection with the server.)

  1. yb_voyager requires wal_level to be logical. You can check this using following the steps:

    1. Run the command SHOW wal_level on the database to check the value.

    2. If the value is anything other than logical, run the command SHOW config_file to know the path of your configuration file.

    3. Modify the configuration file by uncommenting the parameter wal_level and set the value to logical.

    4. Restart PostgreSQL.

  2. Create user ybvoyager for the migration using the following command:

    CREATE USER ybvoyager PASSWORD 'password';

  3. Grant permissions for migration. Use the yb-voyager-pg-grant-migration-permissions.sql script (in /opt/yb-voyager/guardrails-scripts/ or, for brew, check in $(brew --cellar)/yb-voyager@<voyagerversion>/<voyagerversion>) to grant the required permissions as follows:

    psql -h <host> \
     -d <database> \
     -U <username> \
     -v voyager_user='ybvoyager' \
     -v schema_list='<comma_separated_schema_list>' \
     -v is_live_migration=1 \
     -v is_live_migration_fall_back=0 \
     -v replication_group='<replication_group>' \
     -v original_owner_of_tables='<original_owner_of_tables>' \
     -f <path_to_the_script>

    The ybvoyager user can now be used for migration.

  1. yb_voyager requires wal_level to be logical. This is controlled by a database parameter rds.logical_replication which needs to be set to 1. You can check this using following the steps:

    1. Run the command SHOW rds.logical_replication on the database to check whether the parameter is set.

    2. If the parameter is not set, you can change the parameter value to 1 from the RDS console of the database; navigate to Configuration > Parameter group > rds.logical_replication.

    3. If the rds.logical_replication errors out (after the change), create a new parameter group with the value as 1, and assign it to the database instance from the Modify option on the RDS console.

    4. Restart RDS.

  2. Create user ybvoyager for the migration using the following command:

    CREATE USER ybvoyager PASSWORD 'password';

  3. Grant permissions for migration. Use the yb-voyager-pg-grant-migration-permissions.sql script (in /opt/yb-voyager/guardrails-scripts/ or, for brew, check in $(brew --cellar)/yb-voyager@<voyagerversion>/<voyagerversion>) to grant the required permissions as follows:

    psql -h <host> \
     -d <database> \
     -U <username> \
     -v voyager_user='ybvoyager' \
     -v schema_list='<comma_separated_schema_list>' \
     -v is_live_migration=1 \
     -v is_live_migration_fall_back=0 \
     -v replication_group='<replication_group>' \
     -v original_owner_of_tables='<original_owner_of_tables>' \
     -f <path_to_the_script>

    The ybvoyager user can now be used for migration.

If you want yb-voyager to connect to the source database over SSL, refer to SSL Connectivity.

Prepare the target database

Prepare your target YugabyteDB database cluster by creating a database, and a user for your cluster.

Important

Add the following flags to the cluster before starting migration, and revert them after the migration is complete.

For the target YugabyteDB versions 2.18.5.1 and 2.18.6.0 (or later minor versions), set the following flag:

ysql_pg_conf_csv = yb_max_query_layer_retries=0

For all the other target YugabyteDB versions, set the following flags:

ysql_max_read_restart_attempts = 0
ysql_max_write_restart_attempts = 0

Turn off the read-committed isolation level on the target YugabyteDB cluster during the migration.

Create the target database

Create the target YugabyteDB database in your YugabyteDB cluster. The database name can be the same or different from the source database name.

If you don't provide the target YugabyteDB database name during import, yb-voyager assumes the target YugabyteDB database name is yugabyte. To specify the target YugabyteDB database name during import, use the --target-db-name argument with the yb-voyager import commands.

CREATE DATABASE target_db_name;

Create a user

Create a user with SUPERUSER role.

  • For a local YugabyteDB cluster or YugabyteDB Anywhere, create a user and role with the superuser privileges using the following command:

    CREATE USER ybvoyager SUPERUSER PASSWORD 'password';

  • For YugabyteDB Aeon, create a user with yb_superuser role using the following command:

    CREATE USER ybvoyager PASSWORD 'password';
GRANT yb_superuser TO ybvoyager;

If you want yb-voyager to connect to the target YugabyteDB database over SSL, refer to SSL Connectivity.

Create an export directory

yb-voyager keeps all of its migration state, including exported schema and data, in a local directory called the export directory.

Before starting migration, you should create the export directory on a file system that has enough space to keep the entire source database. Next, you should provide the path of the export directory as a mandatory argument (--export-dir) to each invocation of the yb-voyager command in an environment variable.

mkdir $HOME/export-dir
export EXPORT_DIR=$HOME/export-dir

The export directory has the following sub-directories and files:

  • reports directory contains the generated Schema Analysis Report.
  • schema directory contains the source database schema translated to PostgreSQL. The schema is partitioned into smaller files by the schema object type such as tables, views, and so on.
  • data directory contains CSV (Comma Separated Values) files that are passed to the COPY command on the target YugabyteDB database.
  • metainfo and temp directories are used by yb-voyager for internal bookkeeping.
  • logs directory contains the log files for each command.

Migrate your database to YugabyteDB

Proceed with schema and data migration using the following steps:

Export and analyze schema

To begin, export the schema from the source database. Once exported, analyze the schema and apply any necessary manual changes.

Export schema

The yb-voyager export schema command extracts the schema from the source database, converts it into PostgreSQL format (if the source database is Oracle or MySQL), and dumps the SQL DDL files in the EXPORT_DIR/schema/* directories.

Usage for source_db_schema

The source_db_schema argument specifies the schema of the source database.

  • For Oracle, source-db-schema can take only one schema name and you can migrate only one schema at a time.

An example invocation of the command with required arguments is as follows:

# Replace the argument values with those applicable for your migration.
yb-voyager export schema --export-dir <EXPORT_DIR> \
        --source-db-type <SOURCE_DB_TYPE> \
        --source-db-host <SOURCE_DB_HOST> \
        --source-db-user <SOURCE_DB_USER> \
        --source-db-password <SOURCE_DB_PASSWORD> \ # Enclose the password in single quotes if it contains special characters.
        --source-db-name <SOURCE_DB_NAME> \
        --source-db-schema <SOURCE_DB_SCHEMA>

Refer to export schema for details about the arguments.

Analyze schema

The schema exported in the previous step may not yet be suitable for importing into YugabyteDB. Even though YugabyteDB is PostgreSQL compatible, given its distributed nature, you may need to make minor manual changes to the schema.

The yb-voyager analyze-schema command analyses the PostgreSQL schema dumped in the export schema step, and prepares a report that lists the DDL statements which need manual changes. An example invocation of the command with required arguments is as follows:

# Replace the argument values with those applicable for your migration.
yb-voyager analyze-schema --export-dir <EXPORT_DIR> --output-format <FORMAT>

The preceding command generates a report file under the EXPORT_DIR/reports/ directory.

Refer to analyze schema for details about the arguments.

Manually edit the schema

Fix all the issues listed in the generated schema analysis report by manually editing the SQL DDL files from the EXPORT_DIR/schema/*.

After making the manual changes, re-run the yb-voyager analyze-schema command. This generates a fresh report using your changes. Repeat these steps until the generated report contains no issues.

To learn more about modelling strategies using YugabyteDB, refer to Data modeling.

Manual schema changes

Include the primary key definition in the CREATE TABLE statement. Primary Key cannot be added to a partitioned table using the ALTER TABLE statement.

Refer to the Manual review guideline for a detailed list of limitations and suggested workarounds associated with the source databases when migrating to YugabyteDB Voyager.

Import schema

Import the schema using the yb-voyager import schema command.

Usage for target_db_schema

yb-voyager imports the source database into the public schema of the target YugabyteDB database. By specifying --target-db-schema argument during import, you can instruct yb-voyager to create a non-public schema and use it for the schema/data import.

An example invocation of the command with required arguments is as follows:

# Replace the argument values with those applicable for your migration.
yb-voyager import schema --export-dir <EXPORT_DIR> \
        --target-db-host <TARGET_DB_HOST> \
        --target-db-user <TARGET_DB_USER> \
        --target-db-password <TARGET_DB_PASSWORD> \ # Enclose the password in single quotes if it contains special characters..
        --target-db-name <TARGET_DB_NAME> \
        --target-db-schema <TARGET_DB_SCHEMA>

Refer to import schema for details about the arguments.

yb-voyager applies the DDL SQL files located in the $EXPORT_DIR/schema directory to the target YugabyteDB database. If yb-voyager terminates before it imports the entire schema, you can rerun it by adding the --ignore-exist option.

Export data from source

Begin exporting data from the source database into the EXPORT_DIR/data directory using the yb-voyager export data from source command as follows:

# Replace the argument values with those applicable for your migration.
yb-voyager export data from source --export-dir <EXPORT_DIR> \
        --source-db-type <SOURCE_DB_TYPE> \
        --source-db-host <SOURCE_DB_HOST> \
        --source-db-user <SOURCE_DB_USER> \
        --source-db-password <SOURCE_DB_PASSWORD> \ # Enclose the password in single quotes if it contains special characters.
        --source-db-name <SOURCE_DB_NAME> \
        --source-db-schema <SOURCE_DB_SCHEMA> \
        --export-type snapshot-and-changes

PostgreSQL and parallel jobs

For PostgreSQL, make sure that no other processes are running on the source database that can try to take locks; with more than one parallel job, Voyager will not be able to take locks to dump the data.

Migrating source databases with large row sizes

If a table's row size on the source database is too large, and exceeds the default RPC message size, import data will fail with the error ERROR: Sending too long RPC message... So, you need to migrate those tables separately after removing the large rows.

The export data command first ensures that it exports a snapshot of the data already present on the source database. Next, you start a streaming phase (CDC phase) where you begin capturing new changes made to the data on the source after the migration has started. Some important metrics such as the number of events, export rate, and so on, is displayed during the CDC phase similar to the following:

| ---------------------------------------  |  ----------------------------- |
| Metric                                   |                          Value |
| ---------------------------------------  |  ----------------------------- |
| Total Exported Events                    |                         123456 |
| Total Exported Events (Current Run)      |                         123456 |
| Export Rate(Last 3 min)                  |                      22133/sec |
| Export Rate(Last 10 min)                 |                      21011/sec |
| ---------------------------------------  |  ----------------------------- |

Note that the CDC phase will start only after a snapshot of the entire table-set is completed. Additionally, the CDC phase is restartable. So, if yb-voyager terminates when data export is in progress, it resumes from its current state after the CDC phase is restarted.

Important

yb-voyager creates a replication slot in the source database where disk space can be used up rapidly. To avoid this, execute the Cutover to the target or End Migration steps to delete the replication slot. If you choose to skip these steps, then you must delete the replication slot manually to reduce disk usage.

Caveats

  • Some data types are unsupported. For a detailed list, refer to datatype mappings.
  • For Oracle where sequences are not attached to a column, resume value generation is unsupported.
  • --parallel-jobs argument (specifies the number of tables to be exported in parallel from the source database at a time) has no effect on live migration.

Refer to export data for details about the arguments of an export operation.

The options passed to the command are similar to the yb-voyager export schema command. To export only a subset of the tables, pass a comma-separated list of table names in the --table-list argument.

get data-migration-report

Run the yb-voyager get data-migration-report --export-dir <EXPORT_DIR> command to get a consolidated report of the overall progress of data migration concerning all the databases involved (source and target).

Refer to get data-migration-report for details about the arguments.

Import data to target

After you have successfully imported the schema in the target YugabyteDB database, you can start importing the data using the yb-voyager import data to target command as follows:

# Replace the argument values with those applicable for your migration.
yb-voyager import data to target --export-dir <EXPORT_DIR> \
        --target-db-host <TARGET_DB_HOST> \
        --target-db-user <TARGET_DB_USER> \
        --target-db-password <TARGET_DB_PASSWORD> \ # Enclose the password in single quotes if it contains special characters.
        --target-db-name <TARGET_DB_NAME> \
        --target-db-schema <TARGET_DB_SCHEMA> \ # Oracle only.
        --parallel-jobs <NUMBER_OF_JOBS>

Refer to import data for details about the arguments.

For the snapshot exported, yb-voyager splits the data dump files (from the $EXPORT_DIR/data directory) into smaller batches. yb-voyager concurrently ingests the batches such that all nodes of the target YugabyteDB database cluster are used. After the snapshot is imported, a similar approach is employed for the CDC phase, where concurrent batches of change events are applied on the target YugabyteDB database cluster.

Some important metrics such as the number of events, ingestion rate, and so on, is displayed during the CDC phase similar to the following:

| -----------------------------  |  ----------------------------- |
| Metric                         |                          Value |
| -----------------------------  |  ----------------------------- |
| Total Imported events          |                         272572 |
| Events Imported in this Run    |                         272572 |
| Ingestion Rate (last 3 mins)   |               14542 events/sec |
| Ingestion Rate (last 10 mins)  |               14542 events/sec |
| Time taken in this Run         |                      0.83 mins |
| Remaining Events               |                        4727427 |
| Estimated Time to catch up     |                          5m42s |
| -----------------------------  |  ----------------------------- |

The entire import process is designed to be restartable if yb-voyager terminates when the data import is in progress. If restarted, the data import resumes from its current state.

Note

The arguments table-list and exclude-table-list are not supported in live migration. For details about the arguments, refer to the arguments table.
Importing large datasets

When importing a very large database, run the import data command in a screen session, so that the import is not terminated when the terminal session stops.

If the yb-voyager import data to target command terminates before completing the data ingestion, you can re-run it with the same arguments and the command will resume the data import operation.

Migrating Oracle source databases with large row sizes

When migrating from Oracle source, when the snapshot import process, the default row size limit for data import is 32MB. If a row exceeds this limit but is smaller than the batch-size * max-row-size, you can increase the limit for the import data process by setting the following an environment variable to handle such rows:

export CSV_READER_MAX_BUFFER_SIZE_BYTES = <MAX_ROW_SIZE_IN_BYTES>

get data-migration-report

Run the following command with required arguments to get a consolidated report of the overall progress of data migration concerning all the databases involved (source or target).

# Replace the argument values with those applicable for your migration.
yb-voyager get data-migration-report --export-dir <EXPORT_DIR> \
        --target-db-password <TARGET_DB_PASSWORD>

Refer to get data-migration-report for details about the arguments.

Archive changes (Optional)

As the migration continuously exports changes on the source database to the EXPORT-DIR, disk use continues to grow. To prevent the disk from filling up, you can optionally use the archive changes command as follows:

# Replace the argument values with those applicable for your migration.
yb-voyager archive changes --export-dir <EXPORT-DIR> --move-to <DESTINATION-DIR>

Refer to archive changes for details about the arguments.

Cutover to the target

Cutover is the last phase, where you switch your application over from the source database to the target YugabyteDB database.

Keep monitoring the metrics displayed for export data and import data processes. After you notice that the import of events is catching up to the exported events, you are ready to perform a cutover. You can use the "Remaining events" metric displayed in the import data process to help you determine the cutover.

Perform the following steps as part of the cutover process:

  1. Quiesce your source database, that is stop application writes.

  2. Perform a cutover after the exported events rate ("Export rate" in the metrics table) drops to 0 using the following command:

    # Replace the argument values with those applicable for your migration.
yb-voyager initiate cutover to target --export-dir <EXPORT_DIR> --prepare-for-fall-back false

    Refer to cutover to target for details about the arguments.

    The initiate cutover to target command stops the export data process, followed by the import data process after it has imported all the events to the target YugabyteDB database.

  3. Wait for the cutover process to complete. Monitor the status of the cutover process using the following command:

    # Replace the argument values with those applicable for your migration.
yb-voyager cutover status --export-dir <EXPORT_DIR>

    Refer to cutover status for details about the arguments.

  4. If there are Materialized views in the migration, refresh them using the following command:

    # Replace the argument values with those applicable for your migration.
yb-voyager import schema --export-dir <EXPORT_DIR> \
        --target-db-host <TARGET_DB_HOST> \
        --target-db-user <TARGET_DB_USER> \
        --target-db-password <TARGET_DB_PASSWORD> \ # Enclose the password in single quotes if it contains special characters.
        --target-db-name <TARGET_DB_NAME> \
        --target-db-schema <TARGET_DB_SCHEMA> \ # MySQL and Oracle only
        --post-snapshot-import true \
        --refresh-mviews true

Verify migration

After the schema and data import is complete, the automated part of the database migration process is considered complete. You should manually run validation queries on both the source and target YugabyteDB database to ensure that the data is correctly migrated. A sample query to validate the databases can include checking the row count of each table.

Caveat associated with rows reported by get data-migration-report

Suppose you have a scenario where,

  • import data or import data file command fails.
  • To resolve this issue, you delete some of the rows from the split files.
  • After retrying, the import data command completes successfully.

In this scenario, get data-migration-report command reports an incorrect number of imported rows, because it doesn't take into account the deleted rows.

For more details, refer to GitHub issue #360.

End migration

To complete the migration, you need to clean up the export directory (export-dir), and Voyager state ( Voyager-related metadata) stored in the target YugabyteDB database.

Run the yb-voyager end migration command to perform the clean up, and to back up the schema, data, migration reports, and log files by providing the backup related flags (mandatory) as follows:

# Replace the argument values with those applicable for your migration.
yb-voyager end migration --export-dir <EXPORT_DIR> \
        --backup-log-files <true, false, yes, no, 1, 0> \
        --backup-data-files <true, false, yes, no, 1, 0> \
        --backup-schema-files <true, false, yes, no, 1, 0> \
        --save-migration-reports <true, false, yes, no, 1, 0> \
        # Set optional argument to store a back up of any of the above arguments.
        --backup-dir <BACKUP_DIR>

Note that after you end the migration, you will not be able to continue further. If you wish to back up the schema, data, log files, and the migration reports (analyze-schema report and get data-migration-report output) for future reference, the command provides an additional argument --backup-dir, using which you can pass the path of the directory where the backup content needs to be saved (based on what you choose to back up).

Refer to end migration for more details on the arguments.

Delete the ybvoyager user (Optional)

After migration, all the migrated objects (tables, views, and so on) are owned by the ybvoyager user. Transfer the ownership of the objects to some other user (for example, yugabyte) and then delete the ybvoyager user. For example, do the following:

REASSIGN OWNED BY ybvoyager TO yugabyte;
DROP OWNED BY ybvoyager;
DROP USER ybvoyager;

Limitations

  • Schema changes on the source Oracle database will not be recognized during the live migration.
  • Tables without primary key are not supported.
  • Truncating a table on the source database is not taken into account; you need to manually truncate tables on your YugabyteDB cluster.
  • Some Oracle data types are unsupported - User Defined Types (UDT), NCHAR, NVARCHAR, VARRAY, BLOB, CLOB, and NCLOB.
  • Case-sensitive table names or column names are partially supported. YugabyteDB Voyager converts them to case-insensitive names. For example, an "Accounts" table in a source Oracle database is migrated as accounts (case-insensitive) to a YugabyteDB database.
  • For Oracle source databases, table and column names with more than 30 characters are not supported.